Introduction to maps: map types and spatial patterns
Geography starts with a question about where: where people live, where a crop is grown, where a disease spreads, and why there and not somewhere else.
A map is the geographer's main tool for answering it, because it puts information in its place and lets you see how places relate to each other.
This section teaches the two families of maps and how to read the patterns they show.
Every stimulus question on the AP Human Geography exam, from a population choropleth to a map of migration routes, uses these skills, so the reading habits you build here are used in every later unit.
- Every free-response question has seven parts, A to G, and every part is worth 1 point. There are no levels, no half points and no partial credit inside a part.
- Define: the complete, specific meaning, saying what the thing is and how it works or is measured. A neighboring term earns nothing.
- Identify: one term, place, value or category. Nothing more is needed, and extra text can contradict you.
- Describe: the relevant characteristics, in a sentence that says more than the term. A described pattern says where it is.
- Compare: both things in one sentence, with the difference or similarity stated ("..., whereas ...").
- Explain: how or why, with every link of the chain stated (because, so, therefore), ending on the outcome the part names.
- Explain the degree to which: write the degree first (high, moderate or low), then a reason that fits that degree. No degree word, no point.
- A part that sends you to a source ("Using the data shown in the map ...") needs a specific value, place or region from that source. A true general statement earns nothing.
- A pattern needs a location (north, along the river, near the city center) and, on a choropleth, which class sits where. Never write "all" or "none" about a map.
- Answer at the scale or for the actor the part names. Do not restate the question, give one example when one is asked for, and write in sentences, not lists.
- Parts stand alone: an earlier wrong answer never costs a later point, unless a part says "different from" an earlier one.
Reference maps and thematic maps
You need to know that "Types of maps include reference maps and thematic maps."
The difference is the job the map does.
A reference map shows where things are: coastlines, rivers, roads, cities, boundaries and the shape of the land.
Its purpose is location and navigation.
The US Geological Survey's 7.5-minute topographic maps, drawn at a scale of 1:24,000, are classic reference maps: each sheet covers an area roughly 6 to 9 miles on a side and shows its roads, streams, buildings and contour lines.
A state highway map, a political map of the world's countries and the maps in an atlas are also reference maps.
You use one to find a place or plan a route.
A thematic map shows how one topic, or theme, varies over space: income, religion, voting, disease, migration, rainfall.
It keeps only enough reference information (a few boundaries, a coastline) for you to know where you are, and spends the rest of the page on the theme.
Stimulus maps are thematic whenever a question asks you to read a pattern and explain it.
The six kinds below are the ones to recognize on sight.
Choropleth map. Areas such as countries, states, counties or census tracts are shaded by class, usually darker for higher values.
Choropleths suit rates and percentages (the percentage of residents over 65, income per person, the birth rate), because a rate can be compared fairly between areas of different sizes.
The US Census Bureau publishes choropleths of median household income and poverty by county from its American Community Survey.
Their weakness is that each area gets one shade, so the map hides all variation inside an area and makes boundaries look like sharp breaks when the real change may be gradual.
Large, thinly peopled areas also dominate the eye: a huge county with few people catches far more attention than a small, crowded one.
The map below shows the share of residents aged 65 and over in the twelve counties of State Z.
Dot map. Each dot stands for a fixed number of something (25 farms, 1,000 people, one store), placed where it is found.
A dot map shows clustering and dispersal directly.
In 1854 the physician John Snow plotted cholera deaths in the Soho district of London by address and saw them gathered around the public water pump on Broad Street, evidence that the disease spread through water.
The dot map below shows dairy farms in State Z: count the dots and multiply by the key value to get a total.
Proportional symbol map. A symbol, usually a circle, is drawn at each place with its size proportional to a value, such as a city's population or a port's tonnage.
Read the key with care: the circle's area, not its width, is proportional to the value, so a city with four times the population has a circle only twice as wide.
Isoline map. Lines join places with the same value.
Contour lines join places at the same elevation; isotherms join equal temperatures and isobars equal air pressure on National Weather Service maps.
Where isolines are close together the value changes quickly over a short distance (a steep slope); where they are far apart it changes slowly (a gentle slope).
Cartogram. Each area is drawn with its size proportional to a value other than land area, so the map is deliberately distorted.
In a population cartogram of the world, India and China swell and Canada, Russia and Australia shrink.
A common US example is the electoral-vote cartogram of a presidential election: after the 2020 census, California has 54 electoral votes and Wyoming 3, so California is drawn 18 times the size of Wyoming, although by land area it is less than twice as large.
The figure below shows the idea for the five regions of Country Z.
Flow map. Arrows or lines show movement from one place to another, with widths proportional to the amount moved: migrants, trade, commuters or money.
In 1869 the French engineer Charles Minard drew a famous flow map of Napoleon's 1812 invasion of Russia, a band that narrows as the army shrinks.
Flow maps link this unit to migration (Unit 2), diffusion (Unit 3) and trade (Unit 7).
Thematic map
What it shows
Best used for
Main weakness
Choropleth
areas shaded by class
rates and percentages by area
hides variation inside each area
Dot
one dot per fixed amount
clustering and dispersal of things
hard to count where dots overlap
Proportional symbol
symbols sized by value at a point
totals at places (city population)
large symbols overlap and hide small ones
Isoline
lines of equal value
continuous surfaces (elevation, temperature)
only works for values that change smoothly
Cartogram
areas resized by a value
comparing a value across areas
shapes and locations are hard to recognize
Flow
arrows sized by amount moved
migration, trade, commuting
routes are simplified to straight lines
Spatial patterns on maps
You need to know that "Types of spatial patterns represented on maps include absolute and relative distance and direction, clustering, dispersal, and elevation."
Each of these is something a map lets you read.
Absolute distance is the physical distance between two places, measured in miles or kilometers.
The straight-line (great-circle) distance from New York City to Los Angeles is about 2,450 miles (3,940 kilometers).
Relative distance measures separation in time, cost or connection.
By air the trip takes about six hours; by car it takes about 40 hours of driving; by video call it takes no time at all.
Two places can be close in absolute distance and far in relative distance: two towns 10 miles apart on opposite sides of a river with no bridge are a long trip apart.
Absolute direction uses the compass: north, south, east, west, or a bearing in degrees.
Relative direction depends on where the speaker stands and on shared meaning: "back East" to someone in California, "upstate" to a New York City resident, "the Global South" in world politics.
Relative directions are perceptions, so they link to the perceptual regions of the last section of this unit.
Clustering (also called agglomeration or concentration) means things are grouped close together, such as the dairy farms along the Clear River in the dot map, or tech firms in Silicon Valley.
Dispersal means things are spread out, such as farmsteads on the Great Plains, each in the middle of its own fields.
A third pattern word is useful too: a linear pattern follows a line, such as settlements along a river, a coast or a highway.
The great majority of Egypt's people live in a narrow linear band along the Nile Valley and in the Nile Delta, surrounded by sparsely peopled desert.
Elevation is height above sea level, shown on maps by contour lines, spot heights or shading.
Denver is the "Mile High City", with its official elevation of 5,280 feet marked on the steps of the Colorado State Capitol; Badwater Basin in Death Valley, California, is 282 feet below sea level, the lowest point in North America.
Elevation shapes human patterns: cooler highlands attracted settlement in the tropics (Mexico City, Bogotá, Nairobi), while steep slopes discourage farming and roads.
Reading a pattern so it earns the point
A pattern answer has three pieces: the pattern word, where it is, and (on a choropleth) which class is where.
"Clustered" alone earns nothing.
"Clustered in the southeast, along the Clear River" does.
Absolutes lose points: if one dot sits in the northwest, "no farms in the northwest" is false.
Say "few" or "most" and name the area.
Read every map in the same order: title (what, where, when), key (what each shade, dot or line means, and the classes), scale and north arrow, then the pattern, then the exceptions.
Saying the title and key in your head first prevents the most common misreadings, such as treating a map of rates as a map of totals, or a map of exports as a map of imports.
You also need: map projections and why every map is selective (the next section); scales of analysis (later in this unit); population density and distribution (Unit 2), where choropleths and dot maps are the main stimuli.
- Types of maps: Types of maps include reference maps and thematic maps.
- Spatial patterns on maps: Types of spatial patterns represented on maps include absolute and relative distance and direction, clustering, dispersal, and elevation.
- Reference map: a map that shows the locations of places and features, such as roads, rivers, boundaries and cities, for finding places and navigating.
- Thematic map: a map that shows how one topic or variable is distributed across space.
- Relative distance: separation between places measured in time, cost or connectivity instead of miles or kilometers.
Which of the following types of thematic map would best show the number of people who moved from each of four rural regions to one city over ten years?
(A) Choropleth map (B) Isoline map (C) Flow map (D) Reference map (E) Dot map
Key: (C). The data are movements from origins to one destination, with an amount for each; a flow map draws an arrow for each route with its width proportional to the number of migrants, as in the Port City map above.
(A) shades areas by a rate and cannot show where people went.
(B) joins points of equal value on a continuous surface such as elevation.
(D) is not thematic at all; it locates places.
(E) shows where things are, not movements between places.
Method: decide first what the data are: a rate by area (choropleth), a count of things at locations (dot), a total at points (proportional symbol), a smooth surface (isoline), a value that replaces area (cartogram), or movement (flow).
Using the choropleth map of State Z, describe the spatial pattern of the percentage of residents aged 65 and over.
Full-point answer: The percentage of residents aged 65 and over is highest in the northern and western counties, where counties A and E are 25% or more, and lowest in the southeast near the largest city, where counties G, K and L are under 15%.
Point 1. Accept: the share of older residents falls from the northwest to the southeast; the oldest populations are in the rural north and west, the youngest in the southeast.
Does not earn: "Some counties have more older people than others" (no location, no class); "The north has all the oldest counties" (absolute and wrong, since county D in the northeast is only 15% to 19.9%).
Weaker answer: "The map shows a clustered pattern."
It scores 0.
It names a pattern word with no location and no reference to the key's classes.
Explain why a dot map is more useful than a choropleth map for showing where dairy farms are located in State Z.
Full-point answer: A dot map places each dot where the farms actually are, so it shows that most of State Z's dairy farms cluster within about 10 miles of the Clear River in the southeast; a choropleth would shade each whole county one class, so it would hide the farms' clustering along the river inside each county and suggest farms were spread across the county.
Point 1. Accept: a dot map shows exact location and density of farms, so clustering near water and markets is visible; a choropleth suits rates, while farm locations are counts at points.
Does not earn: "A dot map is clearer" (no reason); "A choropleth uses colors" (describes a feature, explains nothing).
Weaker answer: "Dot maps show where things are."
It scores 0 for Explain: it is a true description with no link to what the choropleth would hide or what the dot map reveals about the farms.
Every pattern sentence needs a location.
Write the pattern word, then where it is (direction, along a river or coast, near or far from a city), then, on a choropleth, which class sits there.
Avoid "all", "none", "every" and "only": one exception on the map makes the answer wrong.
- Calling any colored map a choropleth. A choropleth shades areas by class; a map of colored dots or lines is something else. The slip is tempting because most choropleths are colorful, but color alone does not make one.
- Reading a proportional symbol by its width. Area is proportional to the value, so doubling a circle's width quadruples the value it shows. Check the key's sample circles.
- Treating a choropleth of totals like a choropleth of rates. A big, populous county will be dark on a map of total older residents even if its share of older residents is low. Read the key's units first.
- Writing "clustered" or "dispersed" with no place. It loses the pattern point; the word feels like an answer because it is the vocabulary term.
- Confusing relative distance with relative location. Relative distance is separation in time, cost or connection; relative location is a place's position compared with other places (the next sections).
Check your understanding
1. A city planning department wants to show how average rent per square foot changes smoothly across the city, with lines joining places where rent is the same. Which of the following types of map should it use? (A) Dot map (B) Reference map (C) Proportional symbol map (D) Cartogram (E) Isoline map Total [1]
Questions 2 and 3 refer to the dot map of dairy farms in State Z above.
2. Based on the map, which of the following best describes the distribution of dairy farms in State Z? (A) Clustered along the Clear River in the southeast of the state (B) Evenly dispersed across the whole state (C) Clustered in the northwest of the state, away from the river (D) Arranged in a linear pattern along the state's northern border (E) Absent from the part of the state southwest of the Clear River Total [1]
3. Based on the map, which of the following is the best estimate of the number of dairy farms in State Z? (A) 50 (B) 250 (C) 500 (D) 1,250 (E) 2,500 Total [1]
4. On the isoline map of the hill above, point P lies on the west slope and point Q on the east slope. Which of the following best describes the slopes at P and Q? (A) The slope at Q is steeper than at P, because the contour lines are closer together on the east side. (B) The slope at P is steeper than at Q, because the contour lines are farther apart on the west side. (C) The slopes are equal, because the contour interval is 200 feet on both sides. (D) Q is higher than P, because Q is closer to the summit marked 915. (E) P is higher than Q, because the 200-foot contour is drawn farther from the summit on the west side. Total [1]
5. Using the proportional symbol map above, describe the difference between the populations of Ashford and Bellmont as the map shows them.
Total [1]
6. Explain one reason why a map of the travel time from a city center by public transit may show a different pattern from a map of absolute distance from the city center.
Total [1]
7. Respond to parts A and B.
A. Describe one difference between a reference map and a thematic map.
B. Explain one reason a choropleth map of the percentage of residents aged 65 and over may give a misleading impression of where most older residents of State Z live.
Total [2]
Answers
1. (E). Lines that join places of equal value on a smoothly changing surface are isolines, like contour lines for elevation. (A) places dots for counts of things and draws no lines. (B) shows locations, not a theme. (C) sizes symbols at points and cannot show a continuous surface. (D) resizes areas by value.
2. (A). Most of the 50 dots lie within about 10 miles of the Clear River in the southeastern half of the state. (B) ignores the clear grouping. (C) reverses the location: the northwest has only a few dots. (D) misreads the pattern; the river runs northwest to southeast, not along the northern border. (E) is an absolute that the map contradicts, since a few dots lie in the west.
3. (D). There are 50 dots and each stands for 25 farms, so 50 × 25 = 1,250. (A) counts dots without using the key. (B) and (C) misread the key value. (E) doubles the key value.
4. (A). Close contour lines mean the elevation changes quickly over a short distance, so the east slope at Q is steeper. (B) reverses the rule. (C) confuses the contour interval, which is the same everywhere on the map, with spacing, which shows steepness. (D) and (E) are about height, and both points lie between the 200-foot and 400-foot contours, so neither is clearly higher.
5. Ashford's circle is twice as wide as Bellmont's, so Ashford's population (400,000) is four times Bellmont's (100,000), because the circles' areas, not their widths, are proportional to population. Point 1. Accept: Ashford has 300,000 more people than Bellmont; Ashford is the largest town and Bellmont is a quarter of its size. Does not earn: "Ashford is twice as big as Bellmont" (reads width, not area); "Ashford is bigger" (no value from the map).
6. Transit lines and stations are spaced unevenly, so a neighborhood beside a fast rail line may be only 15 minutes from the center while a closer neighborhood with only a slow bus is 40 minutes away; therefore a travel-time map stretches out along slow corridors and pulls in along fast ones, while circles of absolute distance are even in every direction. Point 1. Accept: rivers, highways or rail yards with few crossings make nearby places slow to reach, so relative distance is large where absolute distance is small; traffic congestion lengthens travel time near the center. Does not earn: "Travel time is different from miles" (restates the question); "Transit is slow" (no link to the pattern).
7. Scoring:
- Point 1 (Part A): A reference map shows the locations of features such as roads, rivers and boundaries for finding places, whereas a thematic map shows how one variable, such as income or religion, is distributed across space. Accept: a reference map shows many kinds of features for general use, while a thematic map focuses on one topic; a topographic map locates features, a choropleth shows a rate. Does not earn: a definition of only one of the two maps; "thematic maps have themes" (restates the term).
- Point 2 (Part B): A choropleth shades each county by the percentage of older residents, so a rural county with few people can be dark while a populous urban county is light, even though the urban county contains more older people in total; the map therefore shows where older people are a large share of the population, not where most of them live. Accept: the map hides variation inside counties, so older residents clustered in one town look spread across a whole county; large counties draw the eye more than small, crowded ones. Does not earn: "The map is out of date" (no specific problem); "Choropleths use colors" (no link to misleading).